Oakley Half Jacket XLJ 03-661: Frame Guide
The Oakley® Half Jacket XLJ™, model 03-661, is dated March 2002 in O-Review's Oakley model database. It was Oakley's first dual-lens eyewear with interchangeable lenses, built so wearers could change lenses as lighting conditions changed.

The frame and who it suits
The frame is lightweight O Matter® with metal icon accents, and the temples carry Unobtainium® earsocks and grip anchors. Oakley specifies a three-point fit, with contact at the nose and behind the ears. The open-edge lens design was intended to increase the vertical field of vision, while XYZ Optics was specified for peripheral clarity. It suits sunglasses wearers who want to swap lenses as the light changes rather than keep one pair for every condition.
How to recognise it and tell versions apart
Look inside the left arm. Oakley prints the model number, then the colour code and the size, for example "03-661-01 60□20 140". The first part, 03-661, identifies the model, and the lens width is 60 mm. Oakley's 2002 timeline also lists an Asian Fit Half Jacket Array XLJ alongside the standard version. Do not identify a pair by the Half Jacket name or the lens shape alone. The later Half Jacket 2.0 XL (OO9154) is a separate frame, listed by Oakley with a 130-mm medium size, and Oakley says 2.0 accessory kits are not compatible with the original. The Half Jacket 2.0, Flak Jacket, Flak Jacket XLJ (including the vented version), Flak 2.0, Flak 2.0 XL, Flak Beta and Flak Draft look similar but take a different lens.
What usually wears out
The Unobtainium earsocks are replaceable wear parts; Oakley describes replacement earsocks as restoring grip that can diminish with sweat and motion. Owners have also discussed nose-pad fit and replacement, with some reporting that larger or closer-fitting pads might improve how the frame sits. Owner discussions also mention replacing XLJ lenses or obtaining additional ones.
Replacing the lenses
When the original sunglass lenses need replacing, Walleva replacement lenses are cut to the original shape of the Half Jacket XLJ. They come in polycarbonate or tri-acetate, as polarized lenses or non-polarized.
Frequently Asked Questions
How can I confirm my sunglasses are the Half Jacket XLJ 03-661?
Check the inside of the left arm. If the printed code begins with 03-661, followed by the colour code and a size such as 60□20 140, it is this model.
Will Half Jacket 2.0 XL lenses fit the original Half Jacket XLJ?
No. The Half Jacket 2.0 XL (OO9154) takes a different lens, and Oakley says 2.0 accessory kits are not compatible with the original frame.
Which other frames take the same replacement lenses?
The same lens also fits the Oakley Half Jacket and the Oakley Half Jacket XLJ Vented.
Sources: o-review.com · evo.com · oakley.com · oakleyforum.com · oakley.com · oakley.com
Walleva is an independent maker of replacement lenses and is not affiliated with, sponsored by or endorsed by Oakley, Ray-Ban, Maui Jim, Costa Del Mar, Smith Optics, Wiley X, Bollé, POC or any other eyewear brand. Brand and model names are trademarks of their respective owners and are used only to identify the frames our replacement lenses are made to fit.
