Smith Parallel Family: How to Tell the Frames Apart
Smith®'s Parallel sunglasses come in several close cousins: the Parallel, Parallel Max, Parallel D-Max, Parallel 2 and Parallel Max 2. They look almost identical on a desk, yet their lenses are not shared, so an owner needs to pin down the exact frame before ordering replacement lenses.

Quick comparison
| Frame | Model number | Lens width | How to tell it apart | Replacement lenses |
|---|---|---|---|---|
| Parallel | — | 65 mm | The narrowest member of the family, with a lens width of about 65 mm; confirm the model name printed inside the arm. | Lenses for the Parallel |
| Parallel 2 | — | 71 mm | Prints the size "71□14 125" inside the arm next to the model name, so the name, not the size, is what identifies it. | Lenses for the Parallel 2 |
| Parallel Max | — | 70 mm | Prints the size "70□14 125" inside the arm, the only frame here with a 70 mm lens width. | Lenses for the Parallel Max |
| Parallel D-Max | — | 71 mm | Has a lens width of about 71 mm; because other frames share that width, the model name inside the arm is the deciding clue. | Lenses for the Parallel D-Max |
| Parallel Max 2 | — | 71 mm | Prints the size "71□14 125" inside the arm next to the model name, identical in size to another family member, so read the name carefully. | Lenses for the Parallel Max 2 |
How to tell which one you have
- Open the sunglasses and read the inside of the temple arms. Smith prints the model name there, usually with a size such as "71□14 125": lens width, bridge and arm length in millimetres. Note the name exactly, including any "Max", "D-Max" or "2", because each points to a different lens.
- If the print has worn away, measure the lens width: the widest horizontal distance across one lens, edge to edge. Across this family the figure runs from about 65 mm to 71 mm, and one frame sits at 70 mm, so a single millimetre matters. A ruler laid across a removed lens gives a cleaner reading than measuring through the frame.
- Do not stop at the size. Two frames in this family print the identical "71□14 125", and Parallel Max 2 listings disagree on the bridge (14 mm or 16 mm). Size narrows the field; the name settles it.
- Finally, compare the visible differences described below, such as overall coverage and lens height. Ignore lens colour completely: Smith ships these sunglasses with different main tints plus Ignitor or clear spare lenses, so colour says nothing about the model.
Which lenses fit which frame
No two frames in the Parallel family™ are known to share a lens. The Parallel, Parallel Max, Parallel D-Max, Parallel 2 and Parallel Max 2 each need their own lens, and none takes a lens cut for another. Smith itself states that Parallel Max 2 replacement lenses do not fit Parallel Max or Parallel D-Max frames. A lens that looks close, or even matches in width, can still differ in curve, height or mounting points. Whether buying original sunglass lenses or Walleva replacement lenses, order by the exact frame name, not by size or appearance.
The visible differences between generations
All five frames share the same idea: a lightweight wrap with 9-base curvature, Carbonic TLT lenses, Megol nose and temple pads, auto-locking hinges and swappable lenses for running, cycling, fishing or watersports. The differences are mostly about coverage. The Parallel 2 is described by Smith as a medium-coverage frame, listed at roughly 71 mm wide and 40 mm tall. The Parallel Max 2 uses the same performance frame scaled up for more coverage, with a listed lens height of about 41 mm. The older Parallel Max uses an enlarged lens profile compared with the original Parallel, and the D-Max is the larger-coverage version of the first generation. Those gaps are small, which is why the printed name remains the most reliable clue.
A note on older frames and materials
Later Parallel Max listings mention an Evolve frame made with more than half bio-based material, while second-generation frames are listed in Grilamid TR90 nylon. That detail may apply only to certain production runs, so it should not identify an older pair on its own. For optical needs, such as customized lenses for a prescription wearer, the frame name and lens width give a lab what it needs.
Frequently Asked Questions
Will Parallel Max 2 lenses fit my Parallel Max?
No. Smith states that Parallel Max 2 replacement lenses are not compatible with Parallel Max or Parallel D-Max frames, so each generation needs its own lens.
Two of my frames both say 71□14 125. Do they take the same lens?
Not necessarily. Matching printed sizes do not mean matching lenses; in the Parallel family no two models are known to share a lens, so go by the model name printed beside the size.
Can I tell the model from the lens colour?
No. These sunglasses come with various main tints, often plus Ignitor or clear spares, so one colour turns up across several models. Read the arm or measure the lens instead.
Walleva is an independent maker of replacement lenses and is not affiliated with, sponsored by or endorsed by Oakley, Ray-Ban, Maui Jim, Costa Del Mar, Smith Optics, Wiley X, Bollé, POC or any other eyewear brand. Brand and model names are trademarks of their respective owners and are used only to identify the frames our replacement lenses are made to fit.
